ARB Diff Cover
Compatible Vehicles
- Defender: Front and Rear Salisbury Axles
Special Order - 1-2 Days
SKU
DA8926
£162.95
Info
UK VAT charged at 20%
£135.79
Info
Outside of EU and EU VAT registered companies only (not UK).
> Red Cover
> High tensile solid nodular iron structure (tougher and harder than solid carbon steel) protects the differential and ring & pinion set from the obstacle impact hazards of competition rock crawling, or extreme off road trails.
> Computer optimized cross brace design adds more than 1300 Nm/deg (960ft-lb) of torsional rigidity to the entire axle assembly. This increased flexural strength in the housing helps keep the ring & pinion gears meshing on the flat faces of the teeth, which greatly increases ring & pinion life and overall maximum load strength.
> Carrier bearing life is prolonged, especially on high output vehicles, by the improved support given to the bearing alignment.
> Low-profile shape of the outside surface helps maximise the running gear clearance around the cover.
> Maximized approach/ departure angled exterior surfaces help to minimise rock/ obstacle hang-ups.
> High tensile cap screws (supplied with the kit) are recessed into the cover to protect them from contact with obstacles which might damage or loosen them.
> Cover is powder coated, CNC machined, then clear coated for a durable, professional, long lasting finish; hardware is zinc plated.
> Low profile drain plug design resists damage from obstacles.
> Combination of the high filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil.
> Magnet location in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage.
> Top quality, high power neodymium magnets are used in both the drain plug and the dipstick to collect metallic wear particles as the vehicle moves.
DA8926
> High tensile solid nodular iron structure (tougher and harder than solid carbon steel) protects the differential and ring & pinion set from the obstacle impact hazards of competition rock crawling, or extreme off road trails.
> Computer optimized cross brace design adds more than 1300 Nm/deg (960ft-lb) of torsional rigidity to the entire axle assembly. This increased flexural strength in the housing helps keep the ring & pinion gears meshing on the flat faces of the teeth, which greatly increases ring & pinion life and overall maximum load strength.
> Carrier bearing life is prolonged, especially on high output vehicles, by the improved support given to the bearing alignment.
> Low-profile shape of the outside surface helps maximise the running gear clearance around the cover.
> Maximized approach/ departure angled exterior surfaces help to minimise rock/ obstacle hang-ups.
> High tensile cap screws (supplied with the kit) are recessed into the cover to protect them from contact with obstacles which might damage or loosen them.
> Cover is powder coated, CNC machined, then clear coated for a durable, professional, long lasting finish; hardware is zinc plated.
> Low profile drain plug design resists damage from obstacles.
> Combination of the high filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil.
> Magnet location in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage.
> Top quality, high power neodymium magnets are used in both the drain plug and the dipstick to collect metallic wear particles as the vehicle moves.
DA8926
| OEM / Aftermarket | Aftermarket |
|---|---|
| Warranty | 12 Months |
| Lead Time | Special Order - 1-2 Days |
| Vehicle For | Defender |
Customer Reviews for ARB Diff Cover
Customer Questions
