Series 2/3 88 full hood in black with side windows
Compatible Vehicles
- Series 2 & 3: 88"
Special Order
SKU
EXT250-9BKC
£466.62
Info
UK VAT charged at 20%
£388.85
Info
Outside of EU and EU VAT registered companies only (not UK).
Series 2 88" full hood with windows in black
Fits from the windscreen to the rear of the vehicle on all Short Wheelbase 88" Land Rovers
Created from the original drawings for these hoods dating back to production and original design, enablingl manufacturing of the correct hood.
Lew Gostling was the man behind the design and production of these hoods at Land Rover back in their heyday.
Today they still follow the same methods of manufacture and ensure that the Hoods are correct to the OEM fitted parts of that era.
Using a high-grade window to reduce the risk of cracking or smoking and all our windows are edge finished with the correct tape that was used in production to finish the inside face.
All the hoods of this era had Vinyl fuel splash panels which protected them from over spill of petrol or diesel which helped to prevent this area from losing its proofing and colour. These you can see on the hoods as black vinyl patch above the fuel tank filler.
All the buckles and tips are solid brass and we only use nickel plated brass eyelets.
Using 100% Natural Cotton Fibre for Exmoor Canvas Hoods and Exmoor's 18oz Natural Cotton Canvas over the years has changed with many of the old chemicals used in the past, no longer being used.
The Chemicals now used are very environmentally based and many are organic, which is a big factor and part of their environmental strategy.
We appreciate that this does reduce the life span of the product compared to the heavily treated canvas of the past.
They pre-shrink the canvas and this helps to reduce the onward shrinkage when the product is in use, however if the hood when fitted is not kept lashed down in wet conditions shrinkage can occur please read the fitting instructions and care guide notes and watch our very handy video for fitting the correct way.
We see many hoods poorly fitted so watching the fitting guide to aid the life of your hood is a good tip.
These Original pattern hoods are designed to fit Original Galvanised style hoop sets.
As with all 100% Natural Fibre product it will fade over time and will have some shrinkage, the patterns allow for shrinkage and to increase the life span of your Exmoor hood make sure you follow the care instructions with the dos and don'ts.
EXT250-9BKC
Fits from the windscreen to the rear of the vehicle on all Short Wheelbase 88" Land Rovers
Created from the original drawings for these hoods dating back to production and original design, enablingl manufacturing of the correct hood.
Lew Gostling was the man behind the design and production of these hoods at Land Rover back in their heyday.
Today they still follow the same methods of manufacture and ensure that the Hoods are correct to the OEM fitted parts of that era.
Using a high-grade window to reduce the risk of cracking or smoking and all our windows are edge finished with the correct tape that was used in production to finish the inside face.
All the hoods of this era had Vinyl fuel splash panels which protected them from over spill of petrol or diesel which helped to prevent this area from losing its proofing and colour. These you can see on the hoods as black vinyl patch above the fuel tank filler.
All the buckles and tips are solid brass and we only use nickel plated brass eyelets.
Using 100% Natural Cotton Fibre for Exmoor Canvas Hoods and Exmoor's 18oz Natural Cotton Canvas over the years has changed with many of the old chemicals used in the past, no longer being used.
The Chemicals now used are very environmentally based and many are organic, which is a big factor and part of their environmental strategy.
We appreciate that this does reduce the life span of the product compared to the heavily treated canvas of the past.
They pre-shrink the canvas and this helps to reduce the onward shrinkage when the product is in use, however if the hood when fitted is not kept lashed down in wet conditions shrinkage can occur please read the fitting instructions and care guide notes and watch our very handy video for fitting the correct way.
We see many hoods poorly fitted so watching the fitting guide to aid the life of your hood is a good tip.
These Original pattern hoods are designed to fit Original Galvanised style hoop sets.
As with all 100% Natural Fibre product it will fade over time and will have some shrinkage, the patterns allow for shrinkage and to increase the life span of your Exmoor hood make sure you follow the care instructions with the dos and don'ts.
EXT250-9BKC
| OEM / Aftermarket | Aftermarket |
|---|---|
| Warranty | 12 Months Warranty |
| Lead Time | Special Order |
| Vehicle For | Series 2 & 3 |
Customer Reviews for Series 2/3 88 full hood in black with side windows
Customer Questions
Video provided by Exmoor Trim for the fitment of a canvas hood onto the Series Land Rover.